RSR-ST - Dr Desmo Bar Riser Kit for ST2, ST4 and ST4s models available in 3 different heights [1/2", 3/4" or 1"]. These can be installed so the bars sit as per original or swept back 7.5 degrees for a more relaxed and natural angle on your wrists. Each kit comes with 2 spacers and 8 stainless fasteners. You can use the OEM rubber brake hoses and they work with both types of master cylinders found on these bikes.
* If you have a later bike that came with OEM stainless lines, you will need to change the brake lines [only] on the 2 taller kits. I suggest our FM17 brake line kit for this.
**PLEASE NOTE #1** If the fork tubes have been raised above the top triple clamp from the stock position, (front end dropped for quicker handling), these risers will not work!!! Specially modified 1" risers are available for a small surcharge - shoot us an email and we will get you more info as well as availability.
**PLEASE NOTE #2** When changing ANYTHING on your motocrycle and in particular, changing anything related to your bars such as installing any of these kits, you need to also make absolutely sure that in doing so, the brake hoses, electrical harnesses etc do not touch or interfere with anything after installing and if they do, make whatever corrective action is required so that you keep the clearances needed.