- Brembo P108 caliper PAIR meaning order qty 1 and you get TWO calipers as shown -
Upgrade for: Ducati, MV, Laverda, Rickman etc [Scarab/Lockheed replacement caliper].
Calipers can be mounted on left or right side. Includes new standard Brembo brake pads.
Please choose standard BREMBO brake pads or the other (better) brake pads listed.
Please also choose to get the calipers by themselves or the calipers PLUS 4 25mm long or 30mm long mounting bolts with 0.5mm thick stainless steel AN type washers.
NOTE: If you are replacing a locheed caliper with this Brembo unit be aware that the mount boss on the BREMBO caliper is thinner than your Locheed so your original bolts are now too long and if used, will protrude too far and hit your brake rotor. The solution is to replace the original 30mm long bolts with 25mm long ones.
NOTE #2: See photo with red arrows. The new tooling Brembo made so they could reproduce these calipers again is slightly off. The opper arrow points to an area where you *might* need to grind or file a little bit of clearance in order for them to fit. Check fitment before you tighten everything up. Arrow on the right points to a washer that needs to be put between caliper and fork lower to line things up if converting from Locheed or Scarab calipers. Center of caliper must line up with center or rotor.
