0765.92.580 (076592580) Front & Rear 58mm Intake Manfolds for Dellorto PHM carbs. Both manifolds are identical.
You get what you see here, the right angle found on some bevel drive Ducati such as 900 S2, Darmah etc with an electric starter, and 58mm stud spacing measured center to center. The front one and rear manifolds in this kit are the same with a major bend to it.
You can choose to get them by themselves, or with 2x rubber intake manifold insulators for between them and the heads, and/or I can drill and tap the spots for and include the cheezehead screws and aluminum crush washers used for the vacuum ports - whatever you want. Of course, you can get them as is without the holes drilled and tapped to save some money and you can do the job yourself in order to be able to properly sync your carbs.
)
)
)
)
