Swing arm pivot pin for bevel drives.
Each model single and twin is different, choose which pin you need carefully!
Narrowcase singles are 29mm x 201mm long, widecase singles are 29mm x 256mm long, 750GT/Sport 750/900SS and MHR are 29mm x 298mm long. The Darmah and GTS bikes use a 28mm pin and 290mm long, these are the type that has the wierd eccentric chain adjuster there at the swingarm pivot.
We also have some oversize pins which you can choose when available, these are basically the stock size + 0.003" and can be used when there is only a bit of wear on the bushings or only your old pin is worn due to corrosion etc.
Choose the appropriate pin from the drop down menu here, if your size says OUT OF STOCK please do not order... I don't have it. And YES you can use the oversize pins with new bushings if I am out of stock on the standard size pins.