Stainless Steel Line - Splitter to Tube
FM8 - This stainless steel brakeline kit goes between the splitter and the rigid tube threaded into the calipers - for those of you who want to use the original rigid line that goes between the caliper and hose. I designed the lines to work on bevel drives with the brembo F08 calipers with rigid tubes mounted in front of the forks. The kit is made for us by GALFER USA so you can assured of the quality and it consists of what you see here if you order the "2-Line Kit": 2 ea 14.5" lines, 2 crush washers & 2 brass pills. If you order a 1 line kit you get 1 each. You can choose either black [shown] or clear plastic hose also. Make sure you choose the right splitter to master cylinder line [available seperately] for your specific application to finish off the deal. If you only need 1 line just make your choice in the drop down menu for 1.....
Download the installation guide - click HERE then add to cart to download a large, easy to read .pdf file.
NOTE: If you get a hose with a female end (for the rigid line off the caliper) and the other end has a male threaded end, plus an adapter as shown in the detail photo with red lettering, it's important to follow the steps here. 1: Thread the adapter into your manifold using a crush washer. Insert a brass pill as shown into the female end then thread the loose male threaded end into the adapter and tighten. If you get a line as shown in the main photo with a male and a femal end just follow the instructions on the download manual.