FM29 - This is a 2 line kit we designed to fit bevel drives or modern bikes with lower bars or clipons [Ducati Sport Classic etc] and the later brembo 4 piston calipers and adapter kits we supply. These will obviously fit many applications. Please read the description to see if these would fit your project.
The kit comes complete with a dual banjo bolt for the master cylinder, 2 braided stainless steel brake lines, 2 single banjo bolts and 7 crush washers. It is superior over stock as it eliminates all kinds of places where air bubbles can hide, especially in the original manifold [what we refer to as a splitter]. The lines go directly from your Brembo master cylinder to each Brembo caliper. Remember that if you run a modern Brembo master cylinder, then it will have a built in micro switch for the brake light which you can wire into your harness. If you are still using the original round Brembo MC, the splitter has a brake switch threaded into it. You will have to then also buy a 'dual line banjo switch' which replaces the banjo at the master cylinder or a single line banjo switch where you can then replace a banjo at the caliper with it. The ideal situation is this kit with a modern MC with the built in microswitch.
This kit has 2 lines with 40 degree banjos for the caliper end, the right line is 30" long and the left line is 32.5" long.
Download the installation guide - click HERE then add to cart to download a large, easy to read .pdf file.
)
)
