FM17 - This is a 2 line kit we designed to fit modern bikes with anything from clipons to taller standard bars and dual Brembo F08 calipers or the later 4 piston calipers and adapter kits we also supply. The kit comes complete with a dual banjo bolt for the master cylinder, 2 braided stainless steel brake lines, 2 single banjo bolts and 7 crush washers. It is superior over stock as it eliminates all kinds of places where air bubbles can hide, especially in the original manifold [what we refer to as a splitter]. The lines go directly from your Brembo master cylinder to each Brembo caliper. Remember that if you run a modern Brembo master cylinder, then it will have a built in micro switch for the brake light which you can wire into your harness. If you are still using the original round Brembo MC the splitter has a brake switch threaded into it. You will have to then also buy a 'dual line banjo switch' which replaces the banjo at the master cylinder or a single line banjo switch where you can then replace a banjo at the caliper with it. The ideal situation is this kit with a modern MC with the built in microswitch. This kit has 2 lines with 90 degree banjos for the caliper end, the right line is 31" long and the left line is 34" long.
Download the installation guide - click HERE then add to cart to download a large, easy to read .pdf file.
)
