FM12 - This is a 2 line kit we designed specifically to fit 900SS bevel drive twins with clipons and dual Brembo F08 calipers mounted as original with the F08 calipers IN FRONT of the forks. The kit comes complete with a dual banjo bolt for the master cylinder, 2 braided stainless steel brake lines, 2 single banjo bolts and 7 crush washers. It is superior over stock as it eliminates all kinds of places where air bubbles can hide, especially in the original manifold [what we refer to as a splitter]. The lines go directly from your Brembo master cylinder to each Brembo caliper. Remember that if you run a modern Brembo master cylinder, then it will have a built in micro switch for the brake light which you can wire into your harness. If you are still using the original round Brembo MC the splitter has a brake switch threaded into it. You will have to then also buy a 'dual line banjo switch' which replaces the banjo at the master cylinder or a single line banjo switch where you can then replace a banjo at the caliper with it. The ideal situation is this kit with a modern MC with the built in microswitch. The banjos are 40 degrees at the caliper end of each line, the right line is 22.5" long and the left line is 24" long. We chose 40 degree banjos so the lines would point back and up as per the original routing so you they maintain a somewhat original appearance overall, but give superior performance.
Download the installation guide - click HERE then add to cart to download a large, easy to read .pdf file.