This is a 2 line kit we designed to specifically fit 750 roundcase with LOW bars or clipons & leading axle forks that originally had a Locheed or Scarab caliper which have been converted to dual Brembo P108 calipers and is running a Brembo master cylinder. This is a 2 line kit which bypasses the splitter.
The kit comes complete with a dual banjo bolt for the master cylinder, 2 braided stainless steel brake lines, 2 single banjo bolts and 7 crush washers. It is superior over stock as it eliminates all kinds of places where air bubbles can hide, especially in the original manifold [what we refer to as a splitter]. The lines go directly from your Brembo master cylinder to each Brembo caliper. Remember that if you run a modern Brembo master cylinder, then it will have a built in micro switch for the brake light which you can wire into your harness. If you are still using the original round Brembo MC the splitter has a brake switch threaded into it. You will have to then also buy a 'dual line banjo switch' which replaces the banjo at the master cylinder or a single line banjo switch where you can then replace a banjo at the caliper with it. The ideal situation is this kit with a modern MC with the built in microswitch.
This kit has 2 lines with 0 degree [straight] banjos for the caliper ends, the right line is 29" long and the left line is 32" long. MEASURE YOUR BIKE TO SEE IF THESE HOSES ARE LONG ENOUGH FOR IT.
Download the installation guide - click HERE then add to cart to download a large, easy to read .pdf file.
