This is a 2 line black hose kit we designed to specifically fit a 750 Super Sport that we converted to a Brembo master cylinder and Brembo P108 calipers to replace the Scarab stuff it came with. It will fit early roundcase bikes with clipons & center or leading axle forks that originally had a Locheed or Scarab caliper which have been converted to dual Brembo P108 calipers and is running a Brembo master cylinder. This is a 2 line kit which bypasses the splitter.
The kit comes complete with a dual banjo bolt for the master cylinder, 2 braided stainless steel brake lines, 2 single banjo bolts and 7 crush washers. It is superior over stock as it eliminates all kinds of places where air bubbles can hide, especially in the original manifold [what we refer to as a splitter]. The lines go directly from your Brembo master cylinder to each Brembo caliper. Remember that if you run a modern Brembo master cylinder, then it will have a built in micro switch for the brake light which you can wire into your harness. If you are still using the original round Brembo MC the splitter has a brake switch threaded into it. You will have to then also buy a 'dual line banjo switch' which replaces the banjo at the master cylinder or a single line banjo switch where you can then replace a banjo at the caliper with it. The ideal situation is this kit with a modern MC with the built in microswitch.
This kit has 2 lines with 0 degree [straight] banjos for the caliper ends, the right line is 26 7/8" long with a 0 degree banjo for the master cylinder and the left line is 28 3/8" long with a 12 degree banjo for the master cylinder end. Check out the photos to see how this fit up on the greenframe I designed the kit to fit.
MEASURE YOUR BIKE TO SEE IF THESE HOSES ARE LONG ENOUGH TO FIT YOUR BIKE.
Download the installation guide - click HERE then add to cart to download a large, easy to read .pdf file.
